Abstract
The present study examines electroremediation's efficiency on Cr(VI) contaminated samples. Electrokinetic experiments were performed applying a DC voltage of 30V to a cylindrical sample of 30cm length and 4cm diameter, using Na2SO4 as background electrolyte solution. The first two experiments, one with kaolin and one with soil, were carried out without applying any pH adjustment in the anode or the cathode compartment, using 0.01M Na2SO4. Further experiments were carried out increasing the electrolyte's concentration and using Mg(OH)2 to neutralize the generated acidity in the anode. The decrease in Cr(VI) concentration in the soil samples is partly taking place because of its reduction, most likely due to the presence of organic matter. This is indicated by the mass balance calculations which were based on the analyses of treated solid samples and electrolyte solutions. İn the kaolin samples electromigration is the main factor resulting in the accumulation of Cr(VI) in the anodic solution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Bulletin of environmental contamination and toxicology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.