An adaptive scanning scheme for effective whole field stress separation in digital photoelasticity

Abstract

In photoelasticity, the method of obtaining the individual values of principal stresses/normal stresses separately is referred to as stress separation. Shear difference method is one of the widely used techniques for stress separation in digital photoelasticity. Normally a simple raster scanning approach is used in shear difference method in which stress separation is carried out for all the lines within the model domain by either row-wise horizontally or column-wise vertically starting from the boundary pixels. This requires the presence of a free boundary to start the integration scheme for every row of interest, which is not always possible in most of the practical problems. In order to overcome this, in this paper, an adaptive scanning scheme is proposed so that stress separation can be carried out even if there is only one free boundary pixel available in the model. The new scanning scheme is validated using the theoretically generated data for the problem of a ring subjected to internal pressure. Later, the applicability of this scheme is demonstrated by using two other example problems.