Amino-functionalization of tungsten oxide nanoparticles for stable decoration in the active layer of alumina-supported inorganic-organic hybrid membrane with super-wettable and photocatalytic self-cleaning surfaces for crude oil-in-water emulsion separation

Abstract

The ceramic membrane was hybridized with an amino-functionalized inorganic metal oxide and organic polymer to achieve the optimal oil and water surface wettability and photo-catalytic self-cleaning capability. The resulting membrane was used for the treatment of crude oil-contaminated wastewater under cross-flow filtration mode. The fundamental functional material, tungsten oxide nanoparticles (NH2-WO3 NPs) modified by aminopropyl triethoxysilane (APTES) was created and coated on the alumina ceramic support surface via interfacial polymerization, in which the material covalently cross-links on the membrane's active layer in the presence of terephthaloyl chloride (TPC) as a cross-linker and piperazine (PIP) as an external amine. Achieving a unique combination of oil and water surface wettability- superhydrophilicity (0° water-in-air contact angle) and underwater super-oleophobicity (160.25° under-water oil contact angle) was the key to creating the water-permeating NH2-WO3/PA@alumina ceramic membrane. The second advantageous feature of the membrane is its capacity for self-cleaning, which results from WO3 NP's innate photocatalytic activity that has been further enhanced by amino functionalization. A water permeate flux of up to 250 L m−2 h−1 and an oil/water separation efficiency of nearly 100 % were attained for an oil concentration of 50 ppm of crude oil-in-water emulsion when NH2-WO3/PA@alumina ceramic membrane was employed as a separation medium in a cross-flow filtration system for the separation of crude oil-in-water emulsion. Furthermore, the permeate flux decreased to ∼25 % of its initial flux after using NH2-WO3/PA@alumina ceramic for approximately 210 min. This was caused by organic pollutants in the oily water clogging the membrane pores. The permeate flux was recovered by exposing the membrane to UV light for photo-catalytic self-cleaning. Due to its water-passing nature, this membrane has high efficiency. Additionally, because the self-cleaning add-on removes the need for chemical cleaning, it is environmentally friendly.