Aluminium to steel resistance spot welding with cold sprayed interlayer

Abstract

ABSTRACTStudies on bonding of aluminium alloys to steels are popular because these are structural materials widely used in a variety of industries. However, joining these dissimilar materials is difficult mainly because of the formation of brittle intermetallic compounds. This paper presents a study on welding aluminium to steel by resistance spot welding. Before the welding, steel surface was covered by cold spraying with the layer of aluminium, nickel and nickel–aluminium. This way, instead of the welding of dissimilar materials, the welding of aluminium to aluminium (or nickel) layer pre-deposited on the steel sample was performed. The feasibility of using interlayers for improving the welding of dissimilar materials was tested using SEM, EDX and XRD. Mechanical properties of welds were investigated by microhardness and shear strength tests. The results showed that the coating allowed to decrease hardness in the welding zone and to increase the shear strength of the weld.