Abstract
Refractory metal based alloys show great potential as structural materials for high-temperature applications due to their high melting points, but they are prone to catastrophic oxidation at around ▪. The effectiveness of aluminium diffusion coatings on the oxidation resistance of pure molybdenum, niobium, tantalum, and tungsten was investigated. Homogeneous diffusion layers of Al-rich intermetallic phases were formed on all four refractory metals after pack cementation. Thermodynamic calculations and experimental assessments (e.g., of the activator) determined the most suitable conditions for the pack cementations. Subsequent thermogravimetric analysis of the uncoated and coated samples at ▪ and ▪ for up to ▪ in dry synthetic air was used to determine the protective effect of the coatings and investigate the underlying oxidation mechanisms. Optical and electron microscopy, EPMA, XRD and Raman spectroscopy were used to investigate the diffusion layers and the oxide scales. For two refractory metals (Mo and Ta) the aluminization resulted in an improved oxidation behavior and a substantially decreased oxide growth rate compared to uncoated substrates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
