Alternative storage options for solar thermal systems

Abstract

The efficient implementation of solar systems in buildings depends on the storage of energy yielded, as it can both increase the solar system's autonomy and make it a feasible solution for zero energy buildings, and make storage vessels more compact, reducing precious space requirements. This is of particular important in places with reduced time of sunshine, where solar systems are less effective, because of the deviation between solar radiation and the demand. The traditional storage options use water, which is practical, safe and low-cost, especially when the storage requirements are small. However, when larger storage is needed, limits concerning the use of water exist, mainly due to the need for larger installation space and the increased thermal losses. The use of phase change materials (PCM) for thermal energy storage seems an upcoming technology. The main idea is the substitution of water with PCM, which feature larger specific energy storage capacity compared to other conventional materials. In the context of the specific paper, a combined solar thermal system used for the preparation of domestic hot water (DHW) and space heating (Solar Combi System) with two different types of storage is studied, for two Greek cities. The aim is to find out which is the most efficient way of storing energy with respect to the autonomy of the system, for a solar combi system. This is being achieved by determining the comparative autonomy of PCM and water storage system for various climates. It was proven that using PCM is advantageous, as it can extend the autonomy duration of the solar system for 2 to 8 hours, depending on the season and the climatic conditions. However, it was also seen that in solar combi systems used throughout the whole year, PCM are inefficient during summer period.