Abstract
The study demonstrates the significant enhancement in oil production from a Romanian oil field using alkali-polymer (AP) flooding for reactive viscous oil. We conducted comprehensive interfacial tension (IFT) measurements across various alkali and AP concentrations, along with phase behavior assessments. Micromodel flooding experiments were used to examine pore-scale effects and select appropriate chemical concentrations. We tested displacement efficiency at the core level and experimented with different sequences and concentrations of alkali and polymers to minimize costs while maximizing the additional recovery of reactive viscous oil. The IFT analysis revealed that saponification at the oil-alkali interface significantly lowers IFT, but IFT gradually increases as soap diffuses away from the interface. Micromodels indicated that polymer or alkali injection alone achieve only minimal incremental recovery beyond waterflooding. However, AP flooding significantly enhanced incremental oil recovery by efficiently moving the mobilized oil with the viscous fluid and increasing exposure of more oil to the alkali solution. Coreflood experiments corroborated these findings. We also explored how divalent cations influence polymer concentration selection, finding that softening the injection brine significantly increased the viscosity of the AP slug.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.