Abstract

Virus-laden droplets dispersion may induce transmissions of respiratory infectious diseases. Existing research mainly focuses on indoor droplet dispersion, but the mechanism of its dispersion and exposure in outdoor environment is unclear. By conducting CFD simulations, this paper investigates the evaporation and transport of solid-liquid droplets in an open outdoor environment. Droplet initial sizes (dp = 10 μm, 50 μm, 100 μm), background relative humidity (RH = 35%, 95%), background wind speed (Uref = 3 m/s, 0.2 m/s) and social distances between two people (D = 0.5 m, 1 m, 1.5 m, 3 m, 5 m) are investigated.Results show that thermal body plume is destroyed when the background wind speed is 3 m/s (Froude number Fr ~ 10). The inhalation fraction (IF) of susceptible person decreases exponentially when the social distance (D) increases from 0.5 m to 5 m. The exponential decay rate of inhalation fraction (b) ranges between 0.93 and 1.06 (IF=IF0e-b(D-0.5)) determined by the droplet initial diameter and relative humidity. Under weak background wind (Uref = 0.2 m/s, Fr ~ 0.01), the upward thermal body plume significantly influences droplet dispersion, which is similar with that in indoor space. Droplets in the initial sizes of 10 μm and 50 μm disperse upwards while most of 100 μm droplets fall down to the ground due to larger gravity force. Interestingly, the deposition fraction on susceptible person is ten times higher at Uref = 3 m/s than that at Uref = 0.2 m/s. Thus, a high outdoor wind speed does not necessarily lead to a smaller exposure risk if the susceptible person locating at the downwind region of the infected person, and people in outdoors are suggested to not only keep distance of greater than 1.5 m from each other but also stand with considerable angles from the prevailing wind direction.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call