Aerodynamic noise of high-speed train pantographs: Comparisons between field measurements and an updated component-based prediction model

Abstract

Listen

Translate article

Aerodynamic noise from pantographs becomes an important source of noise from trains at high speeds. Previous studies have mostly been based on numerical predictions using computational aeroacoustic methods, which require large computing resources, or measurements conducted in a wind tunnel which cannot take all the real conditions into account. A component-based model relying on empirical constants obtained from the literature has been shown to predict aerodynamic noise from pantographs that agrees well with wind tunnel measurements. This model is extended in this paper by making use of simulation results on individual cylinders to refine the model constants and the Reynolds number dependence. In addition, allowance for the effect of incoming turbulence and cylinder aspect ratio is also extended. The updated model shows improved agreement with wind tunnel measurements, particularly at low frequencies. This model is then used to predict pantograph noise in more realistic conditions during train pass-by. The incoming flow conditions in terms of the incident flow speed, the turbulence intensity and the turbulence length scale are estimated from the literature considering the development of the boundary layer along the train roof. The sensitivity of the model to these assumptions is assessed using Monte Carlo simulations. The predicted results are compared with field measurements obtained using microphone array techniques for pantograph on different operational trains. Good agreement is obtained between the predictions and the measurements in terms of the far-field noise spectra and the dependence of noise level on speed. Differences are noted between measured levels for different orientations of the pantograph which according to the model are mainly related to the distance of the pantograph from the front of the train.