Aerodynamic and static stability investigation into aircraft coupled system to suborbital space flights

Abstract

PurposeThe aim of the research is to conduct a study into a configuration of an aircraft system with a focus on aerodynamics. In addition, trim condition and static stability constraints were included. The main application of this system is suborbital space flights. The presented concept of a modular airplane system (MAS) consists of two vehicles: a Rocket Plane and a Carrier. Both are designed in tailless configurations but coupled formed a classic tail aircraft configuration, where the Rocket Plane works as the empennage. The most important challenge is to define the mutual position of those two tailless vehicles under the assumption that each vehicle will be operating alone in different flight conditions while joined in one object create a conventional aircraft. Each vehicle configuration (separated and coupled) must fulfil static stability and trim requirements.Design/methodology/approachAircrafts’ aerodynamic characteristics were obtained using the MGAERO software which is a commercial computing fluid dynamics tool created by AMI Aero. This software uses the Euler flow model. Results from this software were used in the static stability and trim condition analysis.FindingsThe main outcome of this investigation is a mutual position of the Rocket Plane and the Carrier that fulfils project requirements. Also, the final configuration of both separated vehicles (Rocket Plane and Carrier) and the complete MAS were defined. In addition, it was observed that in the case of classic aircraft configuration which is created by connecting two tailless vehicles increasing horizontal tail arm reduces static stability. This is related to a significantly higher mass ratio of the horizontal tail (the Rocket Plane) with respect to the whole system. Moving backward, the Rocket Plane has a notable effect on a position of a centre of gravity of the whole system static stability. Moreover, the impact of the mutual vehicles’ position (horizontal tail arm) and inclination angle on the coupled vehicle lift to drag ratio was analysed.Research limitations/implicationsIn terms of aerodynamic computation, MGAERO software using an inviscid flow model, therefore, both a friction drag and breakdown of vortex are not considered. But the presented research is for the computation stage of the design, and the MGAERO software guarantees satisfactory accuracy with respect to the relatively low time of computations. The second limitation is that the presented results are for the conceptual stage of the design and dynamic stability constraints were not taken into account.Practical implicationsThe ultimate goal of the coupled aircraft project is to conduct flying tests and the presented result is one of the milestones to achieve this goal.Originality/valueA design process for a conventional aircraft configuration is well known however, there are not many examples of vehicles that consist of two coupled aircrafts where both vehicles have similar mass. The unique part of this paper includes results of the investigation of the mutual position of the vehicles that can fly alone, as well as in coupled form. The impact of the position of the centre of gravity on trim conditions and static stability of the coupled configuration was investigated.