Abstract

A fully integrated GPS receiver system can enable unique system capabilities by synthesizing both receiver front end and baseband on the same chip, leading to lower area overhead and higher integration. A survey on the GPS receiver system that focuses on front end design is presented in the paper. The first section discusses the various global navigation satellite system (GNSS), followed by the GPS working section. Afterwards, the paper discusses the previous works on the GPS receiver front end design. It provides a detailed survey and classification of various receiver architecture, including the LNA, mixer, filter, and ADC topologies. Besides, several image rejection techniques are presented for more than 50 GPS receivers. The various performance parameters of the GPS receiver front end in the literature are presented with the graphical view in the state-of-the-art discussion section. This literature survey provides the most extensive compilation to date of the various topologies, techniques and explains their implementation in the GPS receiver system. A new figure of merit that includes all the system parameters is proposed. The FOM can be an excellent reference to enhance the research work in the field of GPS receivers. In the end, the paper describes the possible research scope and challenges associated with the design of the GPS receiver front end.

Highlights

  • T HIS paper presents a detailed description of the global positioning system (GPS) receiver front end

  • In this paper, a detailed and comprehensive survey has been done on the performance requirements of the global navigation satellite system (GNSS) receiver system that includes gain, noise, sensitivity, linearity, and the image rejection ratio (IMRR)

  • Based on the literature survey, it is observed that more than 88% of the GPS receiver front end uses low-intermediate frequency (IF) receiver architecture as most of the GPS signal energy lies at the centre frequency

Read more

Summary

INTRODUCTION

T HIS paper presents a detailed description of the global positioning system (GPS) receiver front end. The GPS is used for marine navigation, sports, and hiking [4], [5] These applications can be successfully achieved only if the GPS receivers provide accurate position and speed information. This is possible with high sensitivity receiver in a multi path environment. This paper presents a novel comparative study of demonstrated GPS receiver systems over several measurement scenarios [1]–[3], [6]–[37]and [38]–[47]. Their sensitivity, image rejection ratio (IMRR), noise figure (NF), and gain are analysed concerning power dissipation and publication date.

GNSS OVERVIEW AND WORKING
GPS RECEIVER FRONT END ARCHITECTURE
OFF-CHIP COMPONENTS
GHz LNA
IMAGE REJECTION USING FILTER
STATE OF THE ART DISCUSSION
Findings
CONCLUSION
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call