Abstract
Abstract Prepared activated carbon from fox nutshell by chemical activation with ZnCl2 in the N2 atmosphere was used for Cr(VI) removal from aqueous solution. Activated carbon was produced at 600 °C activation temperature with a 2.0 impregnation ratio for 1 h of activation time has been found as 2869 m2/g, 1.96 and 1.68 cm3/g of highest BET surface area, total pore volume and micropore volume, respectively. Batch mode adsorption studies were carried out by varying agitation speed, pH, temperature, agitation time and initial Cr(VI) concentration. The adsorption of Cr(VI) was pH dependent and showed maximum removal efficiency of Cr(VI) at pH 2.0. Adsorption studies of 10–25 mg/L initial Cr(VI) concentration were conducted at pH of 2.0 and temperature of 30 °C. The equilibrium, kinetics, and thermodynamics of Cr(VI) adsorption were studied. The adsorption capacity of Cr(VI) from the synthetic wastewater was 43.45 mg/g. The experimental adsorption equilibrium data was fitted to Langmuir adsorption model with an adequate adsorption capacity of 46.21 mg/g.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
