Abstract
In order to get good adhesion between polyethylene and copper previous workers have oxidized the metal in alkaline solution to give a matt black oxide film. In this paper it is shown that the good adhesion obtained is associated with the very rough, fibrous nature of the matt black oxide film. Adhesion rises as the layer develops on the copper. If the fibres are damaged to alter the topography without changing the chemical nature of the substrate, the adhesion falls markedly. If the chemical nature of the oxide film is changed by electrolytic reduction, with minimum change in topography, the adhesion is still substantial. Adhesion to these matt black oxide films is still good if oxidation of the polymer is suppressed either by incorporation of stabilizers or by coating in a nitrogen atmosphere. This further points to the importance of topography in adhesion to these surfaces.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.