Abstract

In recent years, robotic systems have been widely used in different applications, and this has motivated researchers to develop different control methods. A model-free, intelligent, robust control method for a nonlinear robotic manipulator system is proposed in this work. This paper presents a novel solution for the major drawbacks of the sliding mode control scheme, which are chattering. Prior knowledge is needed about the dynamic model of the controlled system and the upper bound of uncertainty. In this paper, a fuzzy-like PD controller with SMC (FLPDSM) is proposed. The fuzzy-like PD controller was designed according to fuzzy rules and membership functions based on the nominal model of the robot manipulator. A robust control term was added to the control signal to compensate for the system uncertainty, and external disturbances are compensated by adding an auxiliary robust term to the SMC control law. Two methods for designing robust control terms are proposed. The first proposed method assumes that the upper bound of system uncertainty is known although it cannot be exactly determined due to external disturbances and uncertainty. Hence, a second method was proposed that assumes this bound to be unknown, and an adaptive gain based on Lyapunov theory was used to derive the adaptation law. The Lyapunov second method was used to ensure the stability of the closed loop system. Performance tests on the proposed methods were implemented through simulation studies for the two-link robotic manipulator, and the test results were compared with the standard SMC to verify the effectiveness of the proposed method. A good trajectory tracking with a high robustness against parameter variations and external disturbances was observed under the presented control scheme.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.