Adaptive operating mode switching process in rotating detonation engines

Abstract

In this study, the adaptive mode switching process of rotating detonation waves (RDWs) in response to the change of inlet conditions is numerically explored and analytically explained. Once a quasi-steady rotating detonation flow field is obtained, the inlet total pressure of the reservoir is decreased and maintained at different levels for a certain period of time in order to observe the feedback on the RDWs. It shows that instead of being quenched immediately, the RDWs can adapt to the change of inlet conditions by a mode switching adjustment; it decreases the number of detonation waves and begins to run in a new operating mode, a process that is found to occur swiftly and is corroborated by experimental observations; moreover, an analytical analysis indicates that for a stable RDW flow field, the characteristic parameters such as the number and height of detonation waves are related to the combustor geometry and inlet conditions, which determine whether the RDWs are required to switch into a new operating mode as a means to ensure stability. Additionally, the results indicate that the rotating detonation engine (RDE) can work in different operating modes at the same mass flow rate, or conversely, the RDE can remain in the same operating mode even if the mass flow rate varies.