Active carbon-based waste packaging materials for uranium sorption from aqueous solution

Abstract

Waste (packaging plastic and industrial water) accumulation is one of the great global challenges over the world. Combining waste recycling science and water treatment knowledge are fascinating as applied sciences add value to the safe disposal of waste plastic packaging materials and wastewater. Active carbons (ACs) are prepared from polyethylene terephthalate (PET) at two pyrolysis temperatures (i.e. 450 and 500 °C) and compressed in well-defined designed molds to form cylinder shapes as applied in industry. Particle size (817 and 1074 nm), zeta potential (− 7.17 and − 25.6 mV), surface area (544 and 632 m2/g), and topography of prepared ACs were investigated and discussed. Zeta potential exhibited nice dispersion in accordance to charge value and surficial SEM images prove space hole filling with adsorbed materials after treatment. The prepared activated carbon sorbents have been applied for the removal of radioactive elements from wastewater. The displayed data declare that both sorbents have the same sorption performance, whereas the uranium sorption process using both sorbents is obeyed to pseudo-second-order kinetic model and Langmuir isotherm model. Nevertheless, it is worth noting that the prepared AC at a pyrolysis temperature of 500 °C exhibits higher sorption capacity (38.9 mg g−1) than that prepared at lower temperature, i.e., 450 °C (36.2 mg g−1) which indicates that the increase in pyrolysis temperature improves the sorption characteristics of the yield-activated carbon.