Abstract

Fixed Point-to-Point microwave wireless systems with high spectral efficiency are needed to meet the pervasive and increasing demand for capacity in back-haul networks of mobile radio systems. In this context, spatially multiplexed LoS-MIMO (Line-of-Sight Multiple Input Multiple Output) systems have been studied for about twenty years, particularly in the millimeter wave frequency bands (above 15 GHz). However, their deployment in real networks has been really limited, to the authors’ knowledge. This has been due to several factors, i.e. the practical possibility of using extremely high-level modulation formats (nowadays up to 8192-QAM), the joint use of co-channel dual polarization, and the availability of wider channel bands in the new high frequency ranges (e.g. E-Band). In addition, a crucial reason has been the difficulty of installing multiple antennas spaced apart in order to maximize the MIMO spatial multiplexing so providing the maximum capacity gain. This optimal antenna separation, even for the classical MIMO M×N\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$M \ imes N$$\\end{document} with M = 2 antennas at the receiver and N = 2 antennas at the transmitter, can be several meters, e.g. 5.71 m at 23 GHz on a 5 km link. In this article, we analyze the performance of LoS-MIMO systems where antenna separation is highly sub-optimal, for limiting the array size, and a satisfactory performance is made possible by the exploitation of specific bit loading and power allocation strategies and the setting of the working region of the RF transmitter power amplifiers to operate at a given Signal-to-Inter Modulation Distortion Ratio (SIMDR). The result is an overview of the advantages and drawbacks of compact LoS-MIMO from a wider perspective than in the existing literature, including fundamental aspects for the practical implementation of these systems. Performance is discussed in many cases of interest and compared with the state of the art SISO (Single Input Single Output) system.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call