Abstract
Nowadays in India many accidents are occurred due drunk and drive. So, we have made a project to resolve and predict these incidents, in which we used Arduino, Alcohol sensor, GSM and GPS modules. Here the Alcohol sensor is placed inside the car which will detect whether the driver of the car has drunk or not. If the driver is drunk then the Alcohol sensor will get triggered and the car engine will not turn ON or it will OFF the engine if it is already in ON state. Here the other two modules which are GSM and GPS. If the car has met with an accident the limit switch which is present inside the car will trigger the Arduino by which an SMS will be sent to the particular contacts which are been saved in the Arduino program. The GPS will be connected to the number of satellites so that when the car met with the accident the live location of the car will be sent to the contact through the GSM module. This entire setup of GPS and GSM will be kept inside the car. This entire project can reduce the accidents which are occurred by the drunk and drive and dead corners and also predict the location of the accidents. It results in increasing the human safety and protection
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.