Abstract
This paper describes the results of an accelerated laboratory investigation to measure the rate of deterioration of a newly developed filled plastic composite exposed to acidic (sewage) environments. The specific objective was to compare the relative rates of deterioration of an experimental filled filament wound (FFW) polyester composite immersed in sulfuric (pH 2.23) and acetic (pH 2.22) acid environments at 45 °C. Deterioration was measured in terms of changes in wet specimen weight, loss in dried (soluble) material weight and mechanical properties, the extent of chemical dissolution, and the depth of penetration. Based on regression analyses of these parameters, it was found that the rate of deterioration was a function of the square root of immersion time. Deterioration of the FFW composite in acetic acid was 1.6–3.9 times greater than in the sulfuric acid environment. The loss in wet flexural properties and the dissolution behavior of aluminum trihydrate were not influenced by the type of acid environment. Based on the findings of this study, sulfuric acid is recommended as a standard laboratory test medium for fiberglass reinforced plastic composites used in construction of sewage facilities and pipelines where deterioration due to sulfur oxidizing bacteria is anticipated. Key words: accelerated, polyester, fillers, filament-wound, environment, acidic, durability, composite, septic tanks.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.