Abstract
Broadband millimeter-wave power amplifiers have attracted much attention and have wide applications for 5G communication, satellite communication, radar, sensing, etc. Yet, it is challenging to design a power amplifier with broadband small-signal gain and power performance simultaneously. In this study, a transformer-based symmetrical magnetically coupled resonator (MCR) matching network for broadband output matching and stagger-tuned MCRs are used to achieve both broadband small- and large-signal performance. Also, to enhance the gain for the power amplifier, a three-stage common-source pseudo-differential structure is adopted to mitigate the low-gain issue due to stagger tuning, and the shunt resistors aimed to decrease the Q factor of the MCRs. We used the in-phase two-way current combined with microstrip transmission lines to increase the output power. Designed in 65 nm bulky CMOS technology, the power amplifier presents a 3 dB small-signal gain bandwidth from 25.8 GHz to 36.9 GHz, indicating a peak gain of 25.87 dB at 30.5 GHz. The power amplifier demonstrates a 17.84 dBm saturated output power (Psat) at 31 GHz and a 24.37% peak power added efficiency (PAEmax) at 28 GHz. The power amplifier achieves a flat Psat of 17.44 ± 0.4 dBm, a PAEmax of 22.59 ± 1.78%, and an OP1dB of 13.78 ± 0.31 dBm from 26 GHz to 36 GHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have