A Wideband Microstrip-to-Waveguide Transition Using E-Plane Probe with Parasitic Patch for W-Band Application

Abstract

The hollow metal waveguides are attractive components for millimeter-wave circuits owing to low loss. To integrate with the front-end circuit, a transition from microstrip line to waveguide is required. In this article, a microstrip-to-waveguide transition is presented in the W-band by using an E-plane probe with a parasitic patch. The probe is embedded into the waveguide along the center of the broad wall to excite the TE10 mode. A backshort-circuited waveguide with a quarter wavelength is used to obtain sufficient energy coupling and achieve good impedance matching. The additional parasitic patch can introduce a new resonance at a low frequency to enhance the working bandwidth. Hence, the proposed transition achieves wide working bandwidth and low insertion loss. For verification, a back-to-back transition is constructed and measured. The measured results indicate that the proposed transition has a wide working bandwidth covering the entire W-band. The measured reflection coefficient is below −13 dB from 70 to 110 GHz and the average insert loss is 1.1 dB. Attributed to wide working bandwidth and simple structure, the proposed transition is attractive for W-band circuit systems.