A Universal Dimensionless Phosphate Adsorption Isotherm for Soil

Abstract

Listen

Translate article

AbstractA unique dimensionless phosphate adsorption isotherm, covering the solution concentration range 10−6 to 10−1M P, which has been found to fit 17 materials including 15 soils, pure kaolinite and amorphous Al(OH)3, is derived. The soils shown to fit the isotherm include chromic luvisols, pellic vertisols, calcic luvisols, a tropeptic eutrorthox, a volcanic ash soil from New Zealand, and a number of English soils.The necessary parameters to derive, a complete adsorption isotherm for a particular soil, from the universal isotherm, requires three adsorption experiments in the high concentration range (10−4 to 10−1M P) to define the linear portion of the isotherm and the critical concentration. Three other determinations in the range 10−6 to 10−4M P are needed to obtain the Freundlich isotherm from the data after correction for the effect of the linear region of the isotherm at high concentration. The Freundlich constant a was shown to be a capacity factor, and the constant b to be related to the chemical potential of the phosphate in solution. For the soils studied the variation in the magnitude of b was found to be smaller (0.11 to 0.37) than in a (1.60 to 9.66).The advantage of this universal isotherm over conventional isotherms, is that it requires less experimental work to define and is applicable over a wide range of P concentrations such as might be found surrounding a fertilizer granule.