Abstract
This paper presents a dc–dc boost converter topology for low input and high output voltage applications, such as photovoltaic systems, fuel cell systems, high-intensity discharge lamp, and electric vehicles. The suggested configuration consists of a three-winding coupled-inductor, a single switch and two hybrid voltage multiplier cells. Furthermore, two independent hybrid voltage multiplier cells are in parallel when the single switch S is turned on , and they are in series when the switch S is turned off . So, the advantages of the proposed converter structure are summarized as follows: 1) A coupled inductor with three windings is introduced in the presented converter structure. The two secondary windings of the coupled inductor are, respectively, used to form a hybrid multiplier cell on the one hand, on the other hand, it increases the control freedom of the voltage gain, enhances the utility rate of magnetic core and power density, and reduces the stress of power components to provide a stable constant dc output voltage. 2) The two hybrid multiplier cells can absorb synchronously the energy of stray inductance, which not only reduces the current stress of corresponding diodes, but also greatly alleviates the spike voltage of the main switch, which improves the efficiency. 3) The two hybrid multiplier cells are connected in series to supply power energy for the load, so the voltage gain is extended greatly due to this particular structure. Thus, low-voltage low-conduction-loss devices can be selected and the reverse-recovery currents within the diodes are inhibited. The operating principles and the steady state analyses of the proposed converter are discussed in detail. Finally, a test prototype has been implemented in the laboratory, and the simulated and experimental results show satisfactory agreement with the theoretical analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.