A Thin-foil Proton Recoil spectrometer for DT neutrons using annular silicon detectors

Abstract

The use of Thin-foil Proton Recoil (TPR) spectrometers to measure neutrons from Deuterium-Tritium (DT) fusion plasma has been studied previously and is a well established technique for neutron spectrometry. The study presented here focuses on the optimisation of the TPR spectrometer configurations consisting of Δ E and E silicon detectors. In addition an investigation of the spectrometer's ability to determine fuel ion temperature and fuel ion density ratio in ITER like DT plasmas has been performed.A Python code was developed for the purpose of calculating detection efficiency and energy resolution as a function of several spectrometer geometrical parameters. An optimisation of detection efficiency for selected values of resolution was performed regarding the geometrical spectrometer parameters using a multi-objective optimisation, a.k.a. Pareto plot analysis. Moreover, the influence of detector segmentation on spectrometer energy resolution and efficiency was investigated. The code also produced response functions for the two selected spectrometer configurations. The SPEC code was used to simulate the spectrometer's performance in determining the fuel ion temperature and fuel ion density ratio nt/nd.The results presented include the selected spectrometer configuration with calculated energy resolution and efficiency. For a selected spectrometer resolution of 5% a maximum efficiency of around 0.003% was achieved. Moreover, the detector segmentation allows for a 20% increase in spectrometer efficiency for an energy resolution of 4.3%. The ITER requirements for a 20% accuracy on the nt/nd ratio determination and 10% on the temperature determination within a 100 ms sampling window can be achieved using a combination of several TPR's of same type, in order to boost efficiency.