Abstract
SummarySwitched‐capacitor DC‐DC converters (SC DC‐DC) are analyzed for loss sources, voltage regulation integrity, start‐up latency, and ripple size, while the trade‐offs between these metrics are derived. These analyses are used to design a SC DC‐DC that achieves high efficiency in a wide load current range. Four‐way interleaving was employed to reduce the output ripple and efficiency loss due to this ripple. The design can be reconfigured to achieve gains of 1/3 and 2/5 for inputs ranging between 1.4 and 3.6 V to generate output voltage range of 0.4 to 1.27 V and can supply peak load current of 22 mA. It uses thin‐oxide MOS capacitors for their high density and achieves 75.4% peak efficiency with an input frequency of 100 MHz and a load capacitor of 10 nF. An augmenting LDO that only regulates during sudden load transients helps the converter respond fast to these transients. The chip was implemented using a 65‐nm standard CMOS process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Circuit Theory and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.