A study on the residual stress measurement methods on chemical vapor deposition diamond films

Abstract

Diamond films were deposited on the p-type Si substrate with the hot filament chemical vapor deposition (HFCVD). Residual stresses in the films were measured in air by the laser curvature, the x-ray diffraction (XRD) dϕψ − sin2ψ, and the Raman peak shift methods. All of the measuring methods showed similar behaviors of residual stress that changed from a compressive to a tensile stress with increasing the film thickness. However, values of residual stresses obtained through the Raman and XRD methods were 3–4 times higher than those of the curvature method. These discrepancies involved the setting of materials constants of CVD diamond film, and determination of a peak shifting on the XRD and Raman method. In order to elucidate the disparity, we measured a Young's moduli of diamond films by using the sonic resonance method. In doing so, the Raman and XRD peak shift were calibrated by bending diamond/Si beams with diamond films by a known amount, with stress levels known a priori from the beam theory, and by monitoring the peak shifts simultaneously. Results of each measuring method showed well coincidental behaviors of residual stresses which have the stress range from −0.5 GPa to +0.7 GPa, and an intrinsic stress was caused about +0.7 GPa with tensile stress.