Abstract
Chips scraping each other during transportation, and chips coming into contact with water or air will cause oxidization resulting in poor quality products. The chips need to be well packed and to be protected from the environment. The method of Surface Mount Component (SMC) packing using plastic carrier tape can reduce chip damage. This study focuses on the extrusion process parameters optimization of plastic carrier tape. Because each extrusion process produces 270 pieces of carrier tape, the tape size is 1.35mmX2.25mmX1.35mm and is extremely difficult to reach the tolerance standard. This study utilized a practical test to explore various factors on the quality of the carrier tape, such as the rotational speed of extruder screw motor and extrusion mold; the negative pressure of extrusion mold; and the temperature of the extrusion mold. These experiments could find out an optimal extrusion process.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
