A study of NiZnCu-ferrite/SiO 2 nanocomposites with different ferrite contents synthesized by sol–gel method

Abstract

Ni 0.65Zn 0.35Cu 0.1Fe 1.9O 4/SiO 2 nanocomposites with different weight percentages of NiZnCu-ferrite dispersed in silica matrix were successfully fabricated by the sol–gel method using tetraethylorthosilicate (TEOS) as a precursor of silica, and metal nitrates as precursors of NiZnCu ferrite. The thermal decomposition process of the dried gel was studied by thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The obtained Ni 0.65Zn 0.35Cu 0.1Fe 1.9O 4/SiO 2 nanocomposites were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), Mössbauer spectroscopy and vibrating sample magnetometry (VSM). The formation of stoichiometric NiZnCu-ferrite dispersed in silica matrix is confirmed when the weight percentage of ferrite is not more than 30%. Samples with higher ferrite content have small amount of α -Fe 2O 3. The transition from the paramagnetic to the ferromagnetic state is observed as the ferrite content increases from 20 to 90 wt%. The magnetic properties of the nanocomposites are closely related to the ferrite content. The saturation magnetization increases with the ferrite content, while the coercivity reaches a maximum when the ferrite is 80 wt% in the silica matrix.