Abstract
AbstractHigh purity Al samples were implanted with 35 keV Cl+ then polarized in Cl--free electrolyte in order to ascertain corrosion behavior as a function of Cl content. Electrochemical data indicated implant fluences between 5x1015 and 2x1016 Cl+cm-2 resulted in little or no localized attack. Implant fluences of 3x1016 and 5x1016 Cl+cm-2 resulted in significant attack with the severity scaling as a function of implant fluence. The low variability in the behavior of localized corrosion for the 5x1016 Cl+cm-2 sample suggests that this implant dosage may result in a critical Cl- in the sample for pit nucleation. Optical and Electron microscopy images indicated some reactivity associated with lower fluences (1x1016Cl+cm-2), possibly indicating enhanced general dissolution. At high magnification the corrosion was observed to occur outside the implanted boundary through mechanisms of tunneling or altered local chemistry at those sites. The SEM images reveal a form of localized corrosion with a crystalline character.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.