Abstract
The complete relationship between the pullout load and the displacement of a fibre when it pulls out of the matrix serves as an important parameter in the design of composite materials. Many analytical models for the prediction of the behaviour of composite materials are based on the assumption of a constant friction load between the fibre and the matrix, regardless of the displacement of the fibre. Based on this assumption test techniques were developed [1, 2] in which the critical length of the fibre was determined. The bond strength was calculated from the critical length assuming that the fibre strength and diameter are known. The two techniques are quite similar, and were found by [1] as inapplicable for extremely brittle fibres such as carbon fibres. In addition, some pullout tests suggest an interface friction which depends on the amount of local slippage [3]. Such slip-dependency cannot be identified by test methods based on measuring the critical fibre length only.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.