Abstract

As a precursor of disinfection byproducts, humic acid (HA) has adverse effects on aquatic environments and human health. Currently, many advanced oxidation processes (AOPs) have been proposed to remove HA from drinking water, one of which is photocatalysis. However, the long reaction time required for degradation and drawbacks of the photocatalysts limit the large-scale application of photocatalysis. Therefore, two principal objectives were achieved in this work. First regarding the technology, we combined photocatalysis with ultrasonic waves to remove HA. Second regarding the photocatalyst, quaternary Fe3O4/TiO2-N-GO (FTNG) sono-photocatalysts with different amounts of Fe3O4 were first synthesized using a simple hydrothermal method. Characterizations were performed to confirm the successful synthesis of the sono-photocatalyst and to determine some of its properties. The influence of different experimental factors such as Fe3O4 content, ultrasonic power, catalyst dosage and initial HA concentration were studied. The first-order kinetic and second-order kinetic equations were used to simulate the experimental data. The results showed that FTNG-0.2 with 0.2 g of Fe3O4, which was added upon preparation, showed the highest sono-photocatalytic ability. In our experimental setup, greater than 99% removal efficiency (UV254) and 94% mineralization rate (TOC) were achieved within 90 min at the optimum conditions (60 W ultrasound power and 1.0 g/L catalyst dosage for 30 mg/L HA). Compared with the pseudo-first-order kinetic model, pseudo-second-order model fitted better with the experimental data and it had higher R2 values of 0.92, 0.98 and 0.98 for 30, 40 and 50 mg/L of HA, respectively. According to the scavenging tests and the ESR analysis, both of the OH and O2− were produced in the reaction, however, O2− radicals were assumed to be the dominating reactive species for the HA degradation. Moreover, after five repetitive experiments, the removal efficiency of HA can still reach 88.5%, indicating high stability of FTNG-0.2 sono-photocatalyst. The mechanism of degradation of HA by FTNG-0.2 in sono-photocatalytic system was mentioned based on several factors including the ultrasonic cavitation effect, Fenton-like reactions, photocatalytic reactions, etc. In fact, this was the first study to treat HA through sono-photocatalytic process, which showed great potential in drinking water treatment.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call