A Sliding Mode DITC Cruise Control for SRM With Steepest Descent Minimum Torque Ripple Point Tracking

Abstract

Switched reluctance motors are frequently quoted for electric and hybrid electric vehicle traction. However, high torque ripple is a common restraining disadvantage. This article proposes a design method for model following sliding mode as cruise controller, considering a direct instantaneous torque controller as part of the controlled plant. In addition, a back-electromotive force cancelation is incorporated by modifying the torque reference using the developed model. A minimum torque ripple point tracking (MTRPT) that actuates over the turn- <sc xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">off</small> angle is proposed through an adaptation from the steepest descent maximum power point tracking algorithm. The turn- <sc xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">on</small> angle is also controlled, aiming for enhanced torque regulation. The cruise controller is Lyapunov stable, robust to parameter variations, and is capable of rejecting load disturbances. Experimental results show that the MTRPT convergence time is around <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{2.5 s}$</tex-math></inline-formula> for a load step and around <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{1.625 s}$</tex-math></inline-formula> for a speed step. Besides, the speed tracking capability of the proposed system returns an MAE of 0.9223% and 1.0884% for the ECE-R15 and for the EUDC driving schedules, respectively. The MTRPT is capable of reducing the torque ripple by 14.6% in low speeds (ECE-R15) and by 10.1% at high speeds (EUDC). The results show that the proposed system is well founded for electric and hybrid electric vehicles applications.