Abstract

In this article, a novel single-switch, high step-up dc–dc converter based on three-winding coupled inductor and voltage multiplier circuit (VMC) is proposed. And on this basis, pump capacitor unit (PCU) is integrated to achieve a very high voltage gain. The converter makes full use of the advantages of three-winding coupled inductor, skillfully combines it with the VMC, and integrates the PCU that can be used in superposition to further improve the voltage gain. The voltage stress of the switch is reduced by using a passive clamping circuit to recycle the leakage energy of the coupled inductor. The operating principle and steady-state analysis of the presented converter in continuous conduction mode are introduced in detail. Moreover, the comparative analysis shows that under the same conditions, the proposed converter has higher voltage gain and lower voltage stress than others. Several advantages include high voltage gain, low voltage stress, low turns ratio of coupled inductor, and high conversion efficiency, make the proposed converter very suitable for new energy generation applications, such as photovoltaic systems. Finally, the feasibility of the proposed converter and the correctness of theoretical analysis are verified by a 500-W prototype at 50 kHz switching frequency.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call