A simplified approach for studying the influence of vertical accelerations on seismic response of slopes

Abstract

ABSTRACTA simplified approach is presented for estimating permanent displacements in slopes as a result of both vertical and horizontal seismic accelerations. A study of 52 earthquake records showed that the time difference between maximum horizontal and vertical accelerations varied between 0 and 10.3 s. The approach is illustrated for an earth dam embankment by analysing the effects of five of the above earthquake records. The approach combines a pseudo-static slope stability analysis for estimation of the critical (or yield) horizontal-vertical acceleration combinations, and a Newmark type displacement analysis. Guidelines are presented for conservative choice of soil strength parameters of saturated clays for use in the stability analysis. While permanent displacements of up to 40 cm were predicted without considering the vertical acceleration component, no additional displacement above 3.5 cm resulted when this component was included. The predicted additional displacement was consistently less than 10%, and in 50% of the analyses, vertical acceleration led to smaller predicted displacements. The simple approach may be applied in analysis for any slope using real earthquake records. Using existing, empirical expressions for permanent displacement, based only on horizontal accelerations, the effect of the vertical accelerations may be conservatively estimated by increasing the displacement by 10%.