A simple one-step heat treatment process for preparing biaxially textured buffer layers on rolled Ni tape for high Tc coated conductors’ application

Abstract

Fabrication of YBCO films on metal tapes by a full solution method is a promising technique for industrial application. For this process, the fabrication of suitably textured buffer layers is very important. In this paper, we report a new simple one-step heat treatment process, namely by the simultaneous texture (STEX) technique, for formation of textured buffer layers on cold rolled Ni tape by a sol–gel method. CeO 2 and Ba 0.5Sr 0.5TiO 3 (BST) buffer layers have been prepared using this new process. X-ray diffraction analyses show that the buffer layers are highly c-axis oriented. The FWHM values for ω and ϕ scans of the CeO 2 films are 4.09° (Ni: 4.77°) and 6.04° (Ni: 5.63°). The FWHM values for ω and ϕ scans of BST films are 8.01° (Ni: 7.78°) and 8.55° (Ni: 7.16°). A {1 0 0}〈0 0 1〉-cube texture was also formed in the rolled Ni substrate during the STEX process, indicating cube-on-cube texture formation by only a one-step annealing treatment. The possible mechanisms relating to cube-on-cube texture formation by a one-step annealing treatment are discussed.