Abstract
This paper presents a sensitivity study of MELCOR nodalization for simulation of postulated severe accidents in a Nordic boiling water reactor, with the objective to address the nodal effect on in-vessel accident progression, including thermal-hydraulic response, core degradation and relocation, hydrogen generation, source term release, melt behavior and heat transfer in the lower head, etc. For this purpose, three meshing schemes (coarse, medium and fine) of the COR package of MELCOR are chosen to analyze two severe accident scenarios: station blackout (SBO) accident and large break loss-of-coolant accident (LOCA) combined with station blackout. The comparative results of the MELCOR simulations show that the meshing schemes mainly affect the core degradation and relocation to the lower head of the reactor pressure vessel: the fine mesh leads to a delayed leveling process of a heap-like debris bed in the lower head, and a later breach of the vessel. The simulations with fine mesh also provide more detailed distributions of corium mass and temperature, as well as heat flux which is an important parameter in qualification assessment of the In-Vessel Melt Retention (IVR) strategy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.