A Sensitive and Reliable Carbon Monoxide Monitor for Safety-Focused Applications in Coal Mine Using a 2.33-$\mu$ m Laser Diode

Abstract

In this paper, a stable and reliable carbon monoxide (CO) monitoring system with high sensitivity (at sub-ppm level) was designed and demonstrated with particular reference to use in the mining industry, tailoring the design specifically for forecasting spontaneous combustion, a major hazard to miners. An appropriate strong CO absorption line was used to minimize the interferences expected from gases present in ambient air, with several preferred CO absorption lines selected and investigated, therefore choosing a distributed feedback (DFB) laser operating at a wavelength of 2330.18 nm as the excitation source. Through a detailed investigation, a minimum detection limit of ~0.2 ppm and a measurement precision of <50 ppb were achieved with a 1 s averaging time. Further in tests, a long-term continuous monitoring evaluation was carried out, demonstrated the excellent stability and reliability of the developed CO monitor. The results obtained have validated the potential of this design of a CO monitoring system for practical monitoring applications underground to enhance safety in the mining industry.