Abstract
Accelerometers based on triboelectric nanogenerators (TENGs) have garnered significant interest in recent years. However, many of these devices lack a self-sustained power supply for autonomous wireless operations and a mechanism for over-range detection. Additionally, theoretical investigations on the sensitivity of TENG-based accelerometers are scarce. In this work, a novel self-powered accelerometer for vibration and shock integrating a freestanding triboelectric-layer-based TENG (FT-TENG), two contact-separation TENGs (CS-TENGs) and an electromagnetic generator (EMG) is proposed and then investigated through both numerical simulations and experimental demonstrations. The EMG is used for vibration energy harvesting, exhibiting an impressive power output of 4.11 mW under a vibration acceleration of 12 m/s2. The FT-TENG and the CS-TENGs work for acceleration sensing and over-range detection respectively. Under vibration, the sensitivity and measurement range are related to the frequency of excitation, and the proposed accelerometer has the maximum sensitivity (0.75 V s2/m) at its natural frequency. For shock events, the sensitivity of the accelerometer is dominated by the shock duration in a short-duration range, which is estimated to be 0.12 V s2/m under a shock duration of 0.03 s. This work not only contributes to the understanding of TENGs adopted for sensing but also creates potential applications of triboelectric and electromagnetic energy harvesting and provides a feasible design for autonomous wireless sensor nodes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have