Abstract
The University of British Columbia (UBC) and the British Columbia Research Incorporated (BCRI) collaborated to design a fishing vessel suitable for use on the west coast of Canada. This vessel, called the UBC Series parent hull form, was designed to have a large aft deck area and a volumetric coefficient comparable to those of modern Canadian fishing vessels. The resistance characteristics of this hull were improved without compromising on functionality and usable space. A resistance algorithm developed from the results for a systematic series of low-L/B displacement-type vessels, the UBC Series, was previously published (Calisal&McGreer, 1993). However, during the design process, the seakeeping performance of the vessel was never addressed. This paper describes the seakeeping performance of the UBC series in head seas. An algorithm, developed from the results of the model tests, can be used to calculate the seakeeping response of similar low L/B vessels. To calibrate the seakeeping measurement procedure, tank instrumentation, and data collection system, the ITTC Standard Seakeeping hull form (the S-175 hull form) was tested and the results were compared against published results for this hull form. The same techniques used for the standard hull form were then used to measure the seakeeping performance of the UBC Series. Possible application of the algorithm for non-UBC Series forms is also discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have