A Robust and Conductive Black Tin Oxide Nanostructure Makes Efficient Lithium‐Ion Batteries Possible

Abstract

SnO2 -based lithium-ion batteries have low cost and high energy density, but their capacity fades rapidly during lithiation/delithiation due to phase aggregation and cracking. These problems can be mitigated by using highly conducting black SnO2-x , which homogenizes the redox reactions and stabilizes fine, fracture-resistant Sn precipitates in the Li2 O matrix. Such fine Sn precipitates and their ample contact with Li2 O proliferate the reversible Sn → Li x Sn → Sn → SnO2 /SnO2-x cycle during charging/discharging. SnO2-x electrode has a reversible capacity of 1340 mAh g-1 and retains 590 mAh g-1 after 100 cycles. The addition of highly conductive, well-dispersed reduced graphene oxide further stabilizes and improves its performance, allowing 950 mAh g-1 remaining after 100 cycles at 0.2 A g-1 with 700 mAh g-1 at 2.0 A g-1 . Conductivity-directed microstructure development may offer a new approach to form advanced electrodes.