Abstract
A simple and rapid method has been developed for the homogeneity control of binary alloys in which the alloying element is in solid solution. This is based on the well-known resistance ratio method for the characterization of high-purity metals, but using resistances determined under liquid nitrogen rather than liquid helium. Resistances are measured by the four-point method using a sample holder for up to eight wire samples, connected to a high precision resistance meter. The sensitivity of the resistance ratio to the composition depends on the matrix and alloying elements, but can be high for dilute alloys, decreasing as the concentration increases. It is also influenced by lattice defects and impurities, which prevent absolute measurements of the composition. Two examples of use are given: cobalt segregation was detected in casting of V-1% Co alloy and was confirmed by neutron activation analysis, and homogeneity checks were carried out on a series of CuCr alloys containing 8 to 60 ppm Cr with a precision of 4 ppm Cr (standard deviation) or better.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
