Abstract
Abstract Creep is an important damage mode of components at elevated temperatures, and the temperature and time-dependent stress intensity limit St is an essential indicator in creep assessment of components. In general, the safety factors are directly applied to three criteria in stress intensity limit St in ASME code, but a quantitative evaluation on the failure probability covered in this indicator is rarely reported. Based on this, a probabilistic evaluation method on stress intensity limit St is proposed by correlating each criterion with mean creep rupture life data. The failure probability of three criteria in stress intensity limit St of 316 and 304 stainless steels is calculated, and the effect of safety factors on failure probability results is discussed. A probabilistic evaluation on stress intensity limit St is conducted. Results indicate that the stress intensity limit St presents a low failure probability or high conservativeness, and the minimum stress to creep rupture is the governing role in stress intensity limit St for cases involved. The failure probability of stress intensity limit St of 316 stainless steel is much lower than that of 304 stainless steel, attributed to the differences of creep deformation features and data scatter of the two stainless steels.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
