Abstract

Most of the practical inductive power transfer (IPT) systems are the ones with variable coupling coefficients and loads. The output voltage, current and power are affected by the variation in coupling coefficient and load. In this paper, a novel approach based on a nonlinear resonator is proposed to obtain stable output voltage, which is independent of coupling coefficient and load variation. First, the theory and properties of nonlinear resonators are analyzed by Duffing equation. Then, a nonlinear IPT system with a magnetic saturation inductor is proposed, and the saturable inductor modeling and its effect on system performance are further studied. Finally, the experimental prototype is built to validate the effectiveness of the nonlinear IPT system. The experimental results show that when the coupling coefficient varies from 0.32 to 0.24 and the load resistance varies from 80Ω to 120Ω, the system works in a nonlinear state, the output voltage ripple is 1.77%, and the overall efficiency of the system is not less than 82.60%. The experimental results are basically consistent with the theoretical analysis. The novel design approach improves the output voltage stability with respect to position misalignment and load variation, and the bandwidth of the system is also enhanced.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call