Abstract
Purpose– In this paper, the polygonal-FEM technique is presented in modeling large deformation – large sliding contact on non-conformal meshes. The purpose of this paper is to present a new technique in modeling arbitrary interfaces and discontinuities for non-linear contact problems by capturing discontinuous deformations in elements cut by the contact surface in uniform non-conformal meshes.Design/methodology/approach– The geometry of contact surface is used to produce various polygonal elements at the intersection of the interface with the regular FE mesh, in which the extra degrees-of-freedom are defined along the interface. The contact constraints are imposed between polygonal elements produced along the contact surface through the node-to-surface contact algorithm.Findings– Numerical convergence analysis is carried out to study the convergence rate for various polygonal interpolation functions, including the Wachspress interpolation functions, the metric shape functions, the natural neighbor-based shape functions, and the mean value shape functions. Finally, numerical examples are solved to demonstrate the efficiency of proposed technique in modeling contact problems in large deformations.Originality/value– A new technique is presented based on the polygonal-FEM technique in modeling arbitrary interfaces and discontinuities for non-linear contact problems by capturing discontinuous deformations in elements cut by the contact surface in uniform non-conformal meshes.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call