Abstract
The friction performance is an important factor of parts processed by fused deposition modeling (FDM) for various engineering applications. It is one type of failure made of surface contact. The proper use of FDM process parameters can bring a significant reduction in friction and the amount of wear, thereby leading to a reduction in the material waste. To date, very little studies have been performed in this area. This paper investigates the effect of FDM manufacturing parameters on the friction performance of polycarbonate‐acrylonitrile butadiene styrene prototypes processed by FDM using definitive screening design and partial least squares method. The observation of surface morphology was obtained by the scanning electron microscopy to examine the effect of process parameters on the microstructure. The experimental results have shown that layer thickness, air gap, raster angle, and build orientation are the most influential factors affecting the friction performance of FDM manufactured parts. The proposed approach presented in this study provides an impetus to develop analytical modeling and functional relationships between FDM manufacturing parameters and friction performance. Copyright © 2017 John Wiley & Sons, Ltd.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.