Abstract
The purpose of this study is to investigate the effect of anisotropy of cortical bone tissue on measurement of properties such as direction-dependent moduli and hardness. An advanced three-dimensional finite element model of microindentation was developed. Different modelling schemes were considered to account for anisotropy of elastic or/and plastic regimes. The elastic anisotropic behaviour was modelled employing an elasticity tensor, and Hill's criteria were used to represent the direction-dependent post-yield behaviour. The Oliver-Pharr method was used in the data analysis. A decrease in the value of the transverse elasticity modulus resulted in the increased material's indentation modulus measured in the longitudinal direction and a decreased one in the transverse direction, while they were insensitive to the anisotropy in post-elastic regime. On the other hand, an increase in plastic anisotropy led to a decrease in measured hardness for both directions, but by a larger amount in the transverse one. The size effect phenomenon was found to be also sensitive to anisotropy. The undertaken analysis suggests that the Oliver-Pharr method is a useful tool for first-order approximations in the analysis of mechanical properties of anisotropic materials similar to cortical bone, but not necessarily for the materials with low hardening reserves in the plastic regime.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
