A numerical study of fatigue life in high-speed angular contact ball bearings with thermal and centrifugal expansion

Abstract

PurposeFix-position preloading, centrifugal force and higher temperatures cause the bearing units in angular contact ball bearings to expand, changing the contact load and affecting bearing life. This study aims to examine the effect of thermal and centrifugal expansion on the fatigue life of fix-position preloaded angular contact ball bearings in high-speed operating conditions.Design/methodology/approachThe contact loads on the inner and outer bearing rings were resolved according to the thermal and centrifugal expansion factors in the quasi-static position preloading model. The pressure and frictional stress distribution were used to calculate the subsurface stress in the contact area, while the Zaretsky model was used to determine the relative fatigue life of the inner and outer bearing rings.FindingsUnder fix-position bearing preloading, thermal and centrifugal expansion significantly affected the contact load and relative fatigue life. At the same axial preload, the inner ring contact load was higher than the outer ring contact load, with a maximum difference of 132.3%. The decrease in the inner ring relative life exceeded the outer ring contact load, with a maximum difference of 7.5%, compared to the absence of thermal and centrifugal expansion.Originality/valueThis study revealed the influence of thermal and centrifugal expansion on the fatigue life of angular contact ball bearings in high-speed service conditions.Peer reviewThe peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2023-0065/