Abstract
Al2O3 ceramics are widely used in industry due to their excellent mechanical and physical properties. However, microcracks, voids and high surface roughness (Sa) on the surface of Al2O3 ceramic parts produced in conventional industrial or additive manufacturing have been one of the technical bottlenecks limiting their high-performance applications. In this paper, a novel method of ultrafast laser ablation fracture polishing (ULAFP) of Al2O3 ceramic parts is proposed for improving the surface quality and enhancing the mechanical properties of the polished surfaces. The ULAFP method is developed with an ultrafast laser, which can be set up as a picosecond (PS) or a femtosecond (FS) laser. The PS laser is used to form a remelting layer on the surface to eliminate surface void defects. Combining laser ablation and laser thermal stress-induced crack extension effects, the FS laser is used to rapidly remove the remelted layer and obtain a surface free of crack defects and finally implement FS laser layer-wise ablation to achieve smoother surface finish. The FS laser energy density is controlled at a critical state close to the ablation threshold of the material to avoid surface defects. This ULAFP can reduce the surface roughness (Sa5.254 μm) polishing of Al2O3 ceramics to 0.80 μm, while controlling the total ablation depth of the polishing process to below 100 μm maintaining the dimensional accuracy of the part and dramatically improving the mechanical properties of the polished surface. Compared with the original surface, the hardness and elastic modulus of the polished surface improved by 104.6% and 63.9%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.