A novel theory for rapid localization of the transverse-sigmoid sinus junction and "keyhole" in the retrosigmoid keyhole approach: micro-anatomical study, technique nuances, and clinical application.

Abstract

To determine a rapid and accurate method for locating the keypoint and "keyhole" in the suboccipital retrosigmoid keyhole approach. (1) Twelve adult skull specimens were selected to locate the anatomical landmarks on the external surface of the skull.The line between the infraorbital margin and superior margin of the external acoustic meatus was named the baseline. A coordinate system was established using the baseline and its perpendicular line through the top point of diagastric groove.The perpendicular distance (x), and the horizontal distance (y) between the central point of the "keyhole" and the top point of the digastric groove in that coordinate system were measured. The method was applied to fresh cadaveric specimens and 53 clinical cases to evaluate its application value. (1) x and y were 14.20 ± 2.63mm and 6.54 ± 1.83mm, respectively (left) and 14.95 ± 2.53mm and 6.65 ± 1.61mm, respectively (right). There was no significant difference between the left and right sides of the skull (P > 0.05). (2) The operative area was satisfactorily exposed in the fresh cadaveric specimens, and no venous sinus injury was observed. (3) In clinical practice, drilling did not cause injury to venous sinuses, the mean diameter of the bone windows was 2.0-2.5cm, the mean craniotomy time was 26.01 ± 3.46min, and the transverse and sigmoid sinuses of 47 patients were well-exposed. We propose a "one point, two lines, and two distances" for "keyhole" localization theory, that is we use the baseline between the infraorbital margin and superior margin of the external acoustic meatus and the perpendicular line to the baseline through the top point of the digastric groove to establish a coordinate system. And the drilling point was 14.0mm above and 6.5mm behind the top point of the digastric groove in the coordinate system.