Abstract
As the nuclear resource industry rapidly progresses, efficient adsorbents play a vital role in separating and eliminating uranium from aqueous solutions. Herein, 9,9-dimethyl-fluorenylphosphonic acid was designed as a phosphate functional monomer and the triptycene as a rigid backbone monomer. Through the “knitting” strategy, a novel triptycene-based phosphorylated hyper-crosslinked porous polymer (TPP-DFP) was obtained by the above monomers. The resulted polymer TPP-DFP has a high BET surface area of 1397.62 m2/g with a rich porosity. The porous polymer TPP-DFP was the first time used for uranium adsorption from water and showed outstanding adsorption performance. The maximum uranium adsorption capacity of TPP-DFP was 414.26 mg/g, which was higher than that of most of other porous adsorbents. In the presence of impurity ions such as Ca2+, Mg2+, Al3+, Co2+, Ni2+, V5+, NO3−, CO32− etc., TPP-DFP exhibited high selectivity (Su up to 99%) for uranium. In addition, TPP-DFP has excellent reusability, and the removal percentage of uranium can reach more than 95% after 5 adsorption–desorption cycles. According to the XPS experiment, the mechanism of interaction between TPP-DFP and U(VI) was mainly due to the complex formed by the phosphate functional groups and U(VI). The theory DFT calculation indicated a 1:2 ratio of U(VI) and phosphate functional group on the two-distinct graft chain, which was consistent with the experimental results. Accordingly, the “knitting” polymerization technique showed potential for preparation effective adsorbents for uranium extraction from water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have